Baby bedding is a weird racket. Most of the cute stuff seems to come in sets, but the sets include things that may or may not kill your baby in her sleep, like crib bumpers. And they’re awfully matchy-matchy, as if you need curtains, sheet, bumpers, quilt, and skirt to all be perfectly matched. Personally, I prefer things that “go” rather than match. And the matching sets are often SO babyish, completely unable to grow up with a kid into early childhood. My goal with the twins’ room has been to have a room that is girly but not princess pink, to choose things that they won’t grow out of before they’re potty trained, and to use as many unique, handmade touches as possible. So I decided to make my own crib skirts. I think they turned out great:
I initially followed a pattern for the first skirt, found parts of it confusing, redundant, or unnecessary, and decided to simplify the process for the second skirt. I figured other folks might be interested in a super easy tutorial of my method for making a modern crib skirt, so here it is: how to make a modern crib skirt. There are no gathers, no pleats, noting complicated. If you can cut and sew a straight line, you can do this, I promise. Also, I took the trouble to make this skirt with French seams, encasing all the edges of the fabric, so a serger is not necessary for keeping your crib skirt from raveling in the wash. It should be sturdy enough to last for years.
- For the “deck” or the part that goes under the mattress, you need 1 5/8 yards (44″ or 54″ wide) muslin or other cheap fabric. (I got solid cotton that was on sale for $1.99/yd– no one will see this part)
- For the skirt, 3 yards (44″ or 54″ wide) mid-weight fabric (I used a cotton duck that feels like canvas and claims to be soil resistant)
Cut out your pieces from the fabric:
- For the deck, cut from the muslin a rectangular panel 29″ wide and 53″ long
- For the skirt, cut 6 panels, each 30″ wide by 16.5″ long
Create a hem in each skirt panel by folding up one of the long sides 1/2″ and pressing, and then folding that up again and pressing:
Sew along the upper edge of the fold, making sure to backstitch at the beginning and end of each hem:
Create a similar hem on the two short sides of each skirt panel by folding and pressing 1/2″, folding that up and pressing again, and sewing close to the inner edge of the folded portion. It may help to pin the corners where the fabric is bulky because of the bottom hem:
After you have hemmed the bottom and sides of each skirt panel, fold the deck lengthwise and gently press a crease down the center:
Line up the center of one skirt panel with the center of the deck, right sides of each facing OUT. Pin. (The right side of my deck fabric was hard to see, as it was a solid, so you might want to use a disappearing ink pen to mark “right” on the right side of your deck fabric.)
Sew the two pieces together, sewing very close to the edge:
Press seam open:
Fold over, encasing the edge of the first seam within the fold. Press:
Stitch seam again, sewing close to the edge:
Press seam again, and you’re left with a nicely enclosed edge that won’t fray in the wash:
Repeat process to sew panel to other short end of deck.
Starting at one edge, line up the corner of one skirt piece with the corner of one long side of the deck, again both right sides facing OUT. Pin in place along edge:
(using a grapefruit to keep your fabric from sliding off your table is clearly optional but works great!)
Match the corner of another skirt panel up with the other end of this side of the deck and pin in place. The two panels will overlap in the center:
As with the short sides, sew very close to the edge, press seam open, fold over to enclose cut edges, and stitch again to create a French seam. Repeat on other side of the deck with the last two remaining skirt panels.
Iron out any creases your fabric has gotten throughout the process, and you’re FINISHED! Put your crib skirt on your crib and admire your handiwork:
Note: the skirt will not graze the floor when mattress is raised to the highest newborn position, but should fit nicely for all of the various mattress positions you’ll use as your baby grows.
If you make a crib skirt, I’d love to hear how it goes!